Products

Realistic. Integrity. Service. Focus

Home

Products

DD(TA) series tubing elevator

DD(TA) series tubing elevator is a special tool for lifting and lowering suspended tubing in oil drilling and production operations. The split elevator can work normally under the climatic conditions of -20 ℃ ~ 70 ℃, and is suitable for hanging all kinds of oil pipes with diameter of 21.9in ~ 4 ½in. The rated load of elevator is 65t(585kN), 100t(900kN), 125t(1125kN), 150t(1350kN).

Classification:

Keywords: full series of drill pipe elevator, full series of tubing elevator, full series of sucker rod elevator

Message

0523-87683353

Product Description

DD(TA) series tubing elevator is a special tool for lifting and lowering suspended tubing in oil drilling and production operations.

The split elevator can work normally under the climatic conditions of -20 ℃ ~ 70 ℃, and is suitable for hanging all kinds of oil pipes with diameter of 21.9in ~ 4 ½in. The rated load of elevator is 65t(585kN), 100t(900kN), 125t(1125kN), 150t(1350kN).

DD（TA） Tubing Elevators are convention bottleneck center latch elevators to handle tubing in drilling operation.

The elevators can be used at temperature from minus 20 ℃ to 70℃, and can accommodate taper shoulder tubing from 1.9in to 4½in,working capacity as following: 65t(585kN), 100t(900kN), 125t(1125kN), 150t(1350kN)。

Main parameters, dimensions and weight of DD(TA) tubing elevator

Dimension and weight of DD(TA) elevators

Specifications Model Description	elevator aperture Elevator Bore (Mm)		Applicable tubing specification Tubing specifications			Rated load (kN) and overall dimensions (length x width x height) Rating load and dimension (L×W×H) (Mm)	Each load elevator The approximate net weight Theoretical net weights of each elevator (kN/short ton) (kgs)
			Specifications Spec (in)	Nominal Dimensions Size (Mm)	Joint location Maximum outer diameter Tool Joint dimension (Mm)
	Upper hole Upper	Lower hole Lower
							540 (60)	900 100	1125 (125)	1350 (150)
DD 63	62.31	—	2mm	60.33	65.09	65(585) 405 × 308 × 214 100(900) 425 × 332 × 234 125(1125) 515 × 490 × 254 150(1350) 585 × 535 × 280	30.5	40	77	130
DD 63 × 69	62.31	68.66	2	62.31	65.09		30.5	40	77	128
DD 75	75.01	—	2.	73.03	80.96		30.2	39	76	128
DD 75 × 82	81.36	75.01	2⅞EU	73.03	80.96		30	39	76	127
DD 91	90.88	—	3 ½	88.90	98.43		29	38	75	126
DD 91 × 98	98.02	90.88	3½EU	88.90	98.43		29	38	75	125
DD 104	103.58	103.58	4	101.60	106.36		—	75	74	124
DD 104 × 111	110.74	103.58	4EU	101.60	106.36		—	74	74	122
DD 117	116.66	116.66	4 ½	114.30	119.06		—	73	73	121
DD 117 × 123	123.42	116.66	4½EU	114.30	119.06		—	72	72	119

Note: 1, IU display inside thickness in the table, EU display outside thickness, IEU display inside and outside thickness.

2. The rated load series in the table can be arbitrarily selected for the elevator of each specification listed in the table.

Note: 1. IU means internal upset, EU means external upset, IEU means internal and external upset.

2. Any elevator can be selected from the max load series listed in above chart.

None

online message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.